Driveway/Patio Pressure Washing

  1. Inspection: We assess the surface, spotting issues such as weeds, algae, oil stains, or sinking blocks.

  2. Preparation: Loose debris is cleared and, where needed, chemicals are applied to tackle stubborn growth or stains.

  3. Pressure Washing: Using professional equipment, we clean the surface methodically to avoid streaking and ensure an even finish.

  4. Re-sanding (for block paving): Once dry, kiln-dried sand is brushed into joints to stabilise the blocks and prevent movement.

  5. Optional sealing: If requested, we apply a protective sealant to enhance appearance and slow down future growth.

View of a person standing on a brick sidewalk near a drain with foam and soap suds along the edge of the pavement.

Roof Cleaning

  1. Manual scraping: Specially shaped scrapers matched to your roof tile profile are used to remove moss without using high pressure.

  2. Gutter clearing: All moss that falls into the gutters is removed to ensure proper water flow.

  3. Softwash treatment: A biocidal solution is applied to kill remaining spores and slow regrowth over the following months.

  4. Final tidy-up: All debris is cleared from the surrounding area, leaving the property neat and clean.

View from a rooftop showing moss growing on the tiles, a roof vent, and a street with parked cars, a brick building with arched windows, a green hedge, and trees in the background.

Conservatory Roof Cleaning

  1. Initial check: We inspect the roof panels, seals, and frames to choose the safest and most effective cleaning method.

  2. Softwash approach: Using low-pressure equipment and specialist cleaning solutions, we loosen algae, dirt, and weather staining without risking damage.

  3. Brush and rinse: Soft brushes are used to gently agitate the surface, followed by a controlled rinse that leaves glass or polycarbonate crystal clear.

  4. Frame and gutter clean: We also clean the surrounding uPVC and ensure the conservatory gutters are free-flowing.

A rooftop with blinds built into the roof, under a blue sky with clouds, with neighboring houses and trees in the background.

Gutter, Fascia and Soffit Cleaning

  1. Exterior wash-down: Fascias, soffits, and gutter outsides are treated with a suitable cleaning solution.

  2. Agitation and rinse: Stubborn marks are brushed, then everything is rinsed to a spotless finish without damaging paint or uPVC.

  3. Final inspection: We check for any remaining marks or algae

A worker uses a power washing tool to clean the underside of a gutter on a house with a brick wall and a window.